10” X 54” Heavy Duty Milling Machine

Table Travel – X Axis (Optional Power Feed)

35” / 30.3”

(889 mm) / (770 mm)

Cross Travel – Y Axis

17.5”

(444.5 mm)

Vertical Knee Travel – Z Axis

15.05”

(383.27 mm)

Ram Travel (Overarm) / Swivel

18.5”

(470 mm) / 360°

Spindle Nose-to-Table Surface Travel

5.3” – 20.7”

(135 – 525 mm)

Z² – Quill Travel – Manual & Power Feed

5”

(127 mm)

Quill Feeds – With Trip Release  – Inch

0.0015″  /  0.003″  /  0.006″ 

Quill Feeds – With Trip Release  – Metric

0.04 mm  /  0.08 mm  /  0.16 mm

Quill Diameter

3 – 3/8″

(85.725 mm)

Leadscrew ground pitch (X & Y)

0.2″ per rev. (ballscrews optional)

Scale ring resolution in inches

0.001″ (5 mm) (with adjustable zero position)

Ways – Hardened & Ground

Dovetail Ways in X axis  /  Square Box Ways in Y & Z axes

Spindle Motor

3 HP  /  3 Phase 220 volts  (440 Optional)

Spindle Taper (hardened & ground)

R-8

Spindle Runout

0.0002” maximum runout  (0.005 mm)

Spindle Bearings   ABEC-7 matched set

ABEC-7 matched set Class-7 bearings

Variable Speed Drive – Dual Range

60 – 500 RPM (low-range) / 500 – 4,500 RPM (high-range)

Head Tilt (Left-to-Right)

90° – 0 – 90°

Head Tilt (Front-to-Back / Up-Down)

+45° – 0 – -38°

Head Swivel on Turret

360°

Power Requirements 3-Phase Power

220 vac / 15 amps

(440 vac optional)

Machine Weight

2,750 lbs

(1,250 kgs)

Machine Dimensions L x W x H

65″ x 66″ x 87″