Hybrid 42 mm 8-Axis CNC Swiss Machine

OD Turning Tool Holders – S1

6 – 16 mm (5/8”) Square Shank Tool Holders

ID Internal Tool Holders – S1

5 – 25 mm Shank Round Tool Sleeve Bores

ID Deep Hole Drill Positions – S1

2 – 25 mm Shank Round Tool Sleeve Bores

Cross Slide Live Tools – S1

6 – ER-20 Collet Chuck Spindles, 4,000 RPM, 2 HP (1.6 kw)

Axial Front Slide Live Tool Option – S1

3 – ER-20 Front Axial Live Tools – Optional in lieu of 1 Cross Tool

Maximum Drilling / Tapping Capacity

13 mm Drilling / M10 Tapping 

Cross Drilling / Tapping Capacity Option

10 mm Drilling Capacity / M6 Tapping

Sub-Spindle RPM / Spindle Bearing

6,000 RPM / 4-Bearing – Quad Duplex Pair Configuration

Main Spindle Servo Moto (2.2 / 3.7 kw)

10 HP 15 min Duty Rated (7.5 HP Constant Duty Rated)

Collet Style for Main & Subspindle

Traub-42 / 173E

Maximum Barstock Diameter

1-5/8” (42 mm) (42 mm Parts can Through the Subspindle) 

Spindle Bore

 Ø1.732” (Ø44 mm) (uses Hydraulic Piston Lever Action Collet Closer)

Finished Parts Ejector & Air Blast

Included

Maximum Workpiece Length for Front Ejection

110 mm Maximum Part Length for Front Ejection from Subspindle

OD Turning Tool Holders – S2

3 – 16 mm Square Shank Turning Tool Holders

ID Internal Tool Holders – S2

5 – 25 mm Shank Round Tool Sleeve Bores 

ID Internal Tool Holders – S2 (8 possible)

3 – ER-16 Fixed Tools – Ø3/8” Max.  

Subspindle Axial Live Tools – S2 (8 possible)

3 – ER-16 Axial Live Tools, 4,000 RPM, 1.0 HP (0.75 kw)

 (8-subspindle tool block can mix live & fixed tools, or 2 radial live tools can  be substituted for 2 axial tools on subspindle tool block)

Maximum Drilling / Tapping Capacity

13mm Drilling Capacity / M10 Taping on Sub-Spindle

Maximum Cross Drilling / Tapping Capacity

8mm Drilling Capacity / M6 Tapping

Main Spindle Stroke

12.20” (310 mm)  

X1, Y1, Z1, X2, Y2, Z2 Rapid Traverse Rate

944 IPM (24 m / min)

X1, Z1 Axis Motor Power

2 HP (1.4 kw)

X2, Y1, Y2, Z2 Axis Motor Power

1 HP (.75 kw)

X1, Y2 Linear Ways

Ball-Bearing Linear Ways (Point Contact)

Z2, Y1, Z1, Z2 Linear Ways

Roller-Bearing Linear Ways (Line Contact – Twice as Rigid)

Minimum Input Unit

0.0001” (0.001 mm = 40 millionths/inch)

Machine Dimensions (L x W x H)

121” x 67” x 83” (2,925 x 1,690 x 2,100) + 29” for Conveyor

Machine Weight 

11,024 lbs. (5000 kgs)

Coolant Pump Power

1-3/4 HP (1.3 kw) with Flow Confirmation Monitor

Coolant Tank Capacity

65 gallon Coolant Tank (250 L) (Cutting Oil Only, No Coolant)

Lubrication Distribution (2-liter Capacity)

Way Lube Distributed at 3 – 6 cc / 15 min Cycle  

Machine Power Requirements

220 vac ±5%, 80 amps, 30 kVA, 3 phase, 60 Hz

Air Requirements

85 PSI at 6 CFM for Parts Catcher, Parts Ejector, & Air Blast