52-BY2
9-Axis Mill / Turn Lathe with 12-Angle Tools
- L52 mm 2” Bar Capacity
- LTwin 15 HP 6,000 RPM Opposed Spindles
- L36-Tool Positions - 18-Driven Tools
- LMachine at Any Angle with 12-Tool “B”-Axis
- L“B” Axis and Dual “Y” Axis for Front & Back Work
- LSimultaneous Main & Sub-Spindle Machining
$0.00 Down Financing
Machine Specifications
Main Spindle
Maximum Bar Diameter | A2-5 Spindle with 2.008” (51 mm) Bar Capacity |
Collet Size / Spindle Bearings | Traub TRB-52 / 5 x 90 mm Ball Bearings, 3 Front, 2 Rear |
Maximum Spindle Speed | 6,000 RPM (Integral Motor Spindle) |
Servo Spindle Motor Horsepower | 15 HP (11 kw) Peak, 10 HP (7.5 kw) 30 min Rated |
X1, Y1, Z1 Axis
X1, Y1, Z1 Axis Servo Motor | X1 = 1.3 HP (1.0 kw), Y1 /Z 1 = 2.0 HP. (1.5 kw) |
X1 Axis Travel | 10.63” (270 mm) |
Y1 Axis Travel | 18.11” (460 mm) |
Z1 Axis Travel | 9.84” (250 mm) |
Minimum Programmable Input | 0.00004” resolution (0.001 mm) |
X1, Y1, Z1 Rapid Travel Rate | 1,181 IPM (30 m / min) / 0.0001 mm resolution |
Main Spindle Tooling
Number of Driven Tools | 6 axial & 6 radial driven and “Any-Angle” tools |
Driven Tool Motor Power | 5 HP (3.5 kw) |
Driven Tool Spindle Speed | 2,500 RPM Maximum Driven Tool Spindle Speed |
Driven Tool Collet Size | ER-20 Collet Spindles (up to 1/2” Tool Shank) |
OD Turning Tools | 5 – 20 mm OD Turning Tool Holders Available |
ID Boring Tools | 5 – 25 mm ID Bores Available for Tool Bushings |
Sub-Spindle
Maximum Bar Diameter | 2.008” (51 mm) |
Collet Size | Traub TRB-52 |
Maximum Spindle Speed | 6,000 RPM (Integral Motor Spindle) |
Servo Spindle Motor Horsepower | 15 HP (11 kw) Peak, 10 HP (7.5 kw) 30 min rated |
X2, Y2, Z2 Axis
X2, Y2, Z2 Axis Servo Motor | X2 / Z2 = 1.3 HP (1.0 kw), Y2 = 2.0 HP (1.5 kw) |
X2 Axis Travel | 18.89” (480 mm) |
Y2 Axis Travel | 18.11” (460 mm) |
Z2 Axis Travel | 10.63” (270 mm) |
X2, Y2, Z2 Rapid Travel Rate | 1,181 IPM (30 m/ min) |
Minimum Programmable Input | 0.0001” (0.001 mm = 40 millionths of an inch) |
Ballscrew Diameter | 25 mm Diameter with 10mm Pitch for All Axes |
System Requirements
Number of Axial Driven Tools | 3 Axial Driven Tools, Uses ER-20 Collets |
Number of Radial Driven Tools | 3 Radial Driven Tools, Uses ER-20 Collets |
Driven Tool Motor Power | 2.7 HP (2.0 kw) |
Driven Tool Spindle Speed | 2,500 RPM Maximum Driven Tool Spindle Speed |
Driven Tool Collet Size | ER-20 Collet Spindles (up to 1/2” Tool Shank) |
OD Turning Tools | 4 – 20 mm OD Turning Tool Holders Available |
ID Boring Tools | 4 – 25 mm ID Bores Available for Tool Bushings |
Specifications
Coolant System | 80 Gallon Tank, 4 Coolant Pumps with Flow Control |
Electrical Requirement | 110 amps, 42 kVA, 220 vac ±5%, 3 Phase |
Air Requirements | 85 PSI, 20 cfm, for Parts Catcher, Ejector, Oil Mist Unit |
Machine Weight | 12,345 lbs (5,600 kgs) |
Machine Dimentions | 110”* x 85” x 82” (W x D x H) (* + 38” for Chip Conveyor) |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
Sign up for our monthly newsletter to stay updated with Expand Machinery news and information.
Machine Info
Take a moment to fill this out and one of our team members will send you information about this machine.
Expandmachinery.com | 818.349.9166 | Copyright © 2015-2024 Expand Machinery, LLC. All Rights Reserved.