CW42 MY
8-Axis CNC Twin Spindle Twin Turret with Dual “Y” Axis
- L6,000 RPM Built In Main and Sub Spindle
- L12 Station BMT-55 Turret for Main and Sub Spindle
- L1 5/8” (42 mm) Bar Capacity (2” Optional)
- LFull “Y” Axis for Milling off Centerline on both turrets
- LMarposs Tool Probe for Ease of Setup for each turret
- L6” Kitagawa Chuck for Main and Sub Spindle
- LParts Catcher with Conveyor Included
- LDual 135 PSI High Pressure Coolant Pumps
- LMade in Japan
$0.00 Down Financing
Machine Specifications
Main Spindle - 42 mm
Maximum RPM | 6,000 RPM Built-in integral spindle motor |
Spindle Motor | 10-HP (7.5 Kw 30-minute duty rated) |
Spindle Nose Mount | A2 – 5 |
Maximum Barstock Diameter | 1 5/8” (42 mm, 1.654”) |
Spindle Through Hole Diameter | 1.98” (50.5 mm, 1.988”) |
Maximum Chucking Diameter | 6” |
Maximum Swing Diameter | 14.76” (375 mm) |
Spindle Center Height | 40.8” (1035 mm) |
Sub Spindle
Maximum RPM | 6,000 RPM Built-in integral spindle motor |
Spindle Motor | 10-HP (7.5 Kw 30-minute duty rated) |
Spindle Nose Mount | A2 – 5 |
Maximum Barstock Diameter | 1 5/8” (42 mm, 1.654”) |
Spindle Through Hole Diameter | 1.98” (50.5 mm, 1.988”) |
Maximum Chucking Diameter | 6” |
Maximum Swing Diameter | 14.76” (375 mm) |
Spindle Center Height | 40.8” (1035 mm) |
Axis Specifications
X-Axis Travel (both turrets) | 6.693” (170 mm) |
Z-Axis Travel (both turrets) | 12.598” (320 mm) |
X & Z Rapid Traverse Rates | 787 IPM (20 m / min) |
Y-Axis Travel (both turrets) | 2.362” (60 mm, ± 30 mm = 1.181”) |
Y-Axis Rapid Traverse Rate | 31.5 IPM (8 m / min) |
X & Y Feed Motor Power | 1-HP (.75 Kw) |
Z Axis Feed Motor Power | 1.6-HP (1.2 Kw) |
Tool Turret
Number of Tool Stations | 12-Driven Tool Stations eg.: WTO Quick-Flex toolholders |
Tool Mount | BMT-55 Base Mount Tooling |
Driven Tool Speed | 6,000 RPM (higher with speeder tools) |
Driven Tool Power | 1.34-HP 1 Kw |
Indexing Drive | Servo Motor |
Indexing Time | 1-Second |
Coolant Pressure (both turrets) | 135 PSI |
Machine Dimensions
Machine Weight | 10,584 lbs (4,800 kg) |
Machine Dimensions (W x H x D) | 113” x 93” x 65” (2.6 m x 2.02 m x 1.63 m) |
Coolant Capacity | 80 gallons (300 liters) |
Voltage Requirements | 200 vac ±10% (40 Kva 3-PH) |
Air Pressure Requirement | 0.4 – 0.5 MPs @ 150 L / min. |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
