C42 MYS
6-Axis CNC Twin Spindle Single Turret with “Y” Axis
- L6,000 RPM Built In Main and Sub Spindle
- L10 Station BMT 55 Live Tool Turret
- L1 5/8” (42 mm) Bar Capacity (2” Optional)
- LFull “Y” Axis for Milling off Centerline
- LMarposs Tool Probe for Ease of Setup
- L6” Kitagawa Chuck for Main Spindle
- L5” Kitagawa Chuck for Sub Spindle
- LParts Catcher with Conveyor Included
- LMade in Japan
$0.00 Down Financing
Machine Specifications
Main Spindle - 42 mm
Maximum RPM | 6,000 RPM Built-in integral spindle motor |
Spindle Motor | 10-HP (7.5 Kw 30-minute duty rated) |
Spindle Nose Mount | A2 – 5 |
Maximum Barstock Diameter | 1 5/8” (42 mm, 1.654”) |
Spindle Through Hole Diameter | 1.98” (50.5 mm, 1.988”) |
Maximum Chucking Diameter | 6” (152 mm) |
Maximum Swing Diameter | 9.84” (250 mm) |
Spindle Center Height | 41” (1035 mm) |
Sub Spindle
Maximum RPM | 6,000 RPM Belt-Driven |
Spindle Motor | 10-HP (7.5 Kw 30-minute duty rated) |
Spindle Nose Mount | A2 – 4 |
Maximum Chucking Diameter | 5” |
Maximum Travel Distance | 11.4” (290 mm B-Axis) |
Axis Specifications
X-Axis Travel | 4.33” (110 mm) |
Z-Axis Travel | 10.633” (270 mm) |
X, Z & B Rapid Traverse Rates | 787 IPM (20 m / min) |
Y-Axis Travel | 2.362” (60 mm, ± 30 mm = 1.181”) |
Y-Axis Rapid Traverse Rate | 31.5 IPM (8 m / min) |
X-Axis Servo Motor Power | .67-HP (.5 Kw) |
Y & B Axis Servo Motor Power | 1.0-HP (.75 Kw) |
Z-Axis Servo Motor Power | 1.6-HP, 2.4-HP (1.2 Kw, 1.8 Kw with 52 mm bore) |
Tool Turret
Number of Tool Stations | 10-Driven Tool Stations e.g. WTO Quick-Flex toolholders |
Driven Tool Speed | 6,000 RPM (higher with speeder tools) |
Driven Tool Power | 1.34-HP 1 Kw |
Indexing Servo Motor | Hydraulic Motor |
Indexing Time | 0.8-Seconds |
Coolant Pressure (both turrets) | 135 PSI |
Machine Dimensions
Machine Weight | 4,410 lbs (2,000 kg) |
Machine Dimensions (W x H x D) | 85” x 81” x 60” (w/ rear discharge chip conveyor) |
Coolant Capacity | 29 gallons (110 liters) |
Voltage Requirements | 200 vac ±10% (19 Kva 3-PH) |
Air Pressure Requirement | 0.4 – 0.5 MPs @ 150 L / min. |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
