36-CS
7-Axis CNC Swiss Machine Without Guide Bushing
- L36 mm 1-3/8” Bar Capacity
- LDual “C” Axis and “Y” Axis with 19” Travel
- L27-Tools with 11-Driven Tools
- LSimultaneous Main & Sub-Spindle CNC Swiss Machining
- LParts Catcher and Chip Conveyor Included
- L1,181 Inch per Minute Rapid Rates
$0.00 Down Financing
Machine Specifications
Main Spindle
|
Maximum RPM / Spindle Bearing |
6,000 RPM / 5 Bearing Spindle, 3 Front, 2 Rear ø110 mm |
|
Spindle Motor |
10 HP 3,000 RPM spindle Motor, 2:1 Pulley Ratio |
|
Collet Nose |
Brown & Sharpe #22 or Traub A-32 |
|
Drawtube Bore |
1.456” (37 mm) |
|
Maximum Barstock Diameter |
1.25” (32 mm) Standard 1.375” (36 mm) with Adapter |
|
X-Axis Travel |
7.28” (185 mm) |
|
Y-Axis Travel (true Y-Axis, not compound Y) |
19.29” (490 mm) |
|
Z-Axis Travel |
6.50” (165 mm) |
|
Rapid Travel Speed: X, Y, Z |
1,181 IPM (30 m / min) |
|
Minimum Input Unit |
40 millionths (0.00004”) (0.001 mm) |
|
OD Turning Tool Positions |
6 OD Tools (1/2” or 12 mm) (5-5/8” Tool Plate Available) |
|
ID Turning Tool Positions |
5 ID Tools |
|
OD Turning Tool Size |
1/2” or 12mm (5/8” or 16 mm Optional) |
|
ID Turning Tool Bore Size |
25 mm |
|
Spindle Center Height |
40” (1,015 mm) |
Sub Spindle
|
Sub Spindle RPM/Spindle Bearing |
6,000 RPM / 4-Bearing / Quad-Duplex Pair Configuration |
|
|
Sub Spindle Motor |
5-HP 3,000 rpm Spindle motor, 2:1 pulley ratio |
|
|
Collet Nose |
Brown & Sharpe #22 or Traub A-32 |
|
|
Maximum Barstock Diameter |
1.250” in Collet Chuck (1.080” (27.5mm) Pass Thru) |
|
|
X-Axis Travel |
11.53” (293mm) |
|
|
Z-Axis Travel |
11.61” (295mm) |
|
|
Minimum Input Unit |
0.0001” (0.001mm = 40 millionths inch) |
|
|
ID Turning Tool Bore Size |
25mm |
|
|
Air Blast Nozzle |
Included |
|
|
Finished Parts Ejector |
Included, Along with Parts Catcher & Parts Conveyor Belt |
Live Tooling
|
Cross Slide Live Tools |
4-ER-20 Cross Slide Live Tools, 4,000 RPM, 2.0 HP (1.5 kw) |
|
Front Slide Live Tools |
3-ER-20 Front Slide Live Tools, 4,000 rpm, 1.0 HP (0.75 kw) |
|
Live Tool Collet Size |
ER-20 Collet, Ø1/2” (0.5 – 13 mm) Tool Shank Capacity |
|
Max RPM for Live Tools |
4,000 RPM (1 cross live tool can be substituted on subspindle tool block) |
Machine Dimensions
|
Machine Length |
101” (2420mm) ( *+ 36” for Chip Conveyor) |
|
Machine Depth |
68” (1500mm) |
|
Machine Height |
80” (1985mm) |
|
Machine Weight |
8,000lbs (3,628kgs) |
|
Coolant Pump |
Dual 50psi 3/4-HP Coolant Pumps for Main and Subspindle |
|
Coolant Tank Capacity |
63-gallon Coolant Tank, with Coolant Flow Confirmation Sensor |
|
Lubrication Distribution |
Way Lube Distributed at 3-6 cc / 15-minute Cycle |
|
Machine Power Requirements |
220vac ±5%, 63-amps, 3-phase, 60Hz |
|
Air Requirements |
85-PSI at 10-CFM for Parts Catcher, Parts Ejector, & Air Blast |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
Sign up for our monthly newsletter to stay updated with Expand Machinery news and information.
Expandmachinery.com | 818.349.9166 | Copyright © 2015-2024 Expand Machinery, LLC. All Rights Reserved.