5X-24

Full 5-Axis Machining Capability

Machine Specifications

X-Travel	24.41” 620 mm
Y-Travel	20.47” 520 mm
Z-Travel	18.11” 460 mm
Spindle Nose to Table Surface	5.51”– 23.62” 140 – 600 mm
Spindle Center to Z-axis way covers	17.71” 450 mm (throat dimension)
Maximum Workpiece Dimension	Ø20.47” x 13” tall Ø520 x 330 mm tall

Spindle Motor – S1/S2/S3 =11/15/18.5kw	25 HP Peak, 20 HP 30 min duty-rating
Spindle Speed	15,000 RPM Direct-Drive (20,000 RPM optional)
Spindle Torque – Dual Winding Motor	70 ft-lb @ 0 – 1,500 RPM (95.5 N-m)
Tool Type	CAT #40 Taper BT #40, HSK-63 optional
Spindle Taper Material / Hardness	SCM415 / HRC 58 – 62
Retention System / Holding Capability	Bellville Spring Stack, 1,650 – 1,760 lbs
Spindle Runout	≤ 0.000040” T.I.R.
Spindle Bearings – Front	110 mm NSK 70BNR 2, P4 class-7 bearings
Spindle Bearings – Rear	110 mm NSK 70BNR 2, P4 class-7 bearings

Rapid Traverse X, Y, Z	1,417 IPM 36 m / min
Cutting Feedrate	0.04 – 394 IPM / 10,000 mm / min
Axis Drive Motor Power – X, Y	4.7 HP 3.5 kw
Axis Drive Motor Power – Z	4.7 HP 3.5 kw w/ brake
Ballscrews – X, Y, Z	32 mm ballscrews 12 mm pitch
Thrust Force – X, Y, Z (maximum / constant)	8,268 lbs / 2,862 lbs 65 nm / 22.5 nm
Least Input Command Increment	0.0001” / 0.000040” 0.001 mm / (40-millionths in metric)

Tool Capacity (40+1) Hi-Speed Tool Changer

Tool Shank

Tool Change Time – Tool-to-Tool

Maximum Tool Diameter w/ adjacent tool

Maximum Tool Length

Maximum Tool Weight

Tool Selection / Tool Access

60-Tool Twin-Arm

CAT#40 Taper BT#40, HSK 63 optional

3.2-sec Tool-to-Tool

5” / 3” 127 mm / 76 mm

10” 250 mm

15 lbs / 7kg

Random access / Bi-directional

Air Service Requirements	85 PSI @ 14-scfm 6 kg / cm²
Electrical Requirements – connected load	55 KVA 220 vac±5%, 60-Hz
Coolant Capacity / Pressure	106 gallons / 300 PSI 400 liters / 20-bar
Floor space Requirements (W x D x H)	160” x 130” x 119” 405 x 328 x 301 cm
Machine Weight	21,384 lbs 9,700 kg
Warranty – 1-year machine warranty	3-year Mitsubishi control, motors, & drive warranty