GMV-4 CNC
12” X 54” 40-Taper Heavy Duty CNC Plus Mill
- LFull Manual & CNC Capability
- LIdeal for R&D Toolroom shops
- LEasy to use CNC Control
- LPrecision Ball Screws
- LRugged Meehanite castings with high density cast iron
- LHardened & Ground Table ways
$0.00 Down Financing
Machine Specifications
Table
Table Size (W x L) | 12″ x 54″ | (254 x 1,372 mm) |
Table Travel with CNC Control | 33.5″ | (850 mm) |
Travel Capacity | 1,200 lbs | |
T-Slot Width (3 T-Slots) | 5/8″ T-Slots with ground reference edges (15.9 mm wide) |
Machine Travels & Capacity
Table Travel – X Axis | 34.75″ | |
Cross Travel – Y Axis | 14″ | |
Knee Travel | 16″ | (406 mm) |
Ram Travel | 17.7″ | (450 mm) |
Spindle Nose-to-Table Surface Travel | 2″ – 18″ | (50 – 457 mm) |
Ballscrew ground pitch (X & Y) | 0.2″ per rev. | |
Adjustable scale ring resolution | 0.001″ | (0.0254 mm) |
Slide Ways
Hardened & Grounded Meehanite® Processed Cast Iron | |
Longitudinal Table – Z Axis | Hardened & Ground Dovetail Ways |
Cross Slide to Knee – Y Axis | Hardened & Ground Square Box Ways |
Knee to Column | Hardened & Ground Square Box Ways |
Spindle Head
Head Tilt (Left-to-Right) | 90° – 0 – 90° |
Head Tilt (Front-to-Back / Up-Down) | 45° – 0 – 45° |
Head Swivel | 360° |
Spindle Motor | 5 HP / 3 Phase 208 – 240 vac |
Spindle Taper | NMTB #40 N.S. Taper |
Spindle Runout | 0.0002″ maximum runout (0.005 mm) |
Spindle Bearings | Fafnir ABEC-7 Matched set of Class-7 Bearings |
Variable Speed Drive – Dual Range | 80 – 520 RPM (low-range) / 600 – 4,000 RPM (high-range) |
Note: 5,000 RPM Electronic Variable-Speed Spindle |
Quill
Quill Travel – CNC Z-Axis | 5″ (127 mm) Manual & Power Feed w/o 3rd CNC Axis |
Quill feeds (per rev.) with Trip Release – Inch | 0.0015″ / 0.003″ / 0.006″ |
Quill feeds (per rev.) with Trip Release – Metric | 0.04 mm / 0.08 mm / 0.16 mm |
Quill Diameter | 4.13″ (105 mm) |
Dimensions & Weight
Power Requirements 3 Phase | 208 – 220 vac ±5% @ 22 amps (440 vac optional) / | |
Coolant Capacity | 11 Gallons | (41 Liters) |
Machine Weight | 1,600 kgs |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
Sign up for our monthly newsletter to stay updated with Expand Machinery news and information.
Machine Info
Take a moment to fill this out and one of our team members will send you information about this machine.
Expandmachinery.com | 818.349.9166 | Copyright © 2015-2024 Expand Machinery, LLC. All Rights Reserved.