T-500
510 mm High Speed Mill-Drill-Tap Center
- L12,000 RPM Inline Direct-Drive Beltless Spindle
- L21-Tool Drum Turret
- LTool Change Time 1.6 sec tool-to-tool, Servo motor driven
- L2,362 Inch per Minute Rapid Rates
- LBT#30 BBT Dual Contact Big-Plus Spindle
- L6,000 RPM Synchronous Rigid Tapping
$0.00 Down Financing
Machine Specifications
Axis Travel
X-Travel | 20.08” 510 mm |
Y-Travel | 16.93” 430 mm |
Z-Travel | 12.99” 330 mm |
Spindle Nose to Rotary Table Surface | 5.1” – 18.1”, 130 – 460 mm |
Spindle Center to Column | 18.89” 480 mm |
Work Table
Table Surface Dimension (X, Y) | 22.04” x 15.75”, 560 x 400 mm |
T-Slot Dimension / Spacing | 3 – 14 mm T-slots / 125 mm center distance spacing |
Table Height | 35” above floor, 890 mm |
Maximum Table Weight for Rated Accuracy | 550 lbs, 250 kg @ 60 m / min (770 lbs @ 48 m / min) |
Spindle
Spindle Motor – Mitsubishi DJ-D5.5 / 120-01 | 7.5 HP, 3.7 / 5.5 kw 25% Duty-Cycle |
Spindle Motor Coupling | Inline Direct-Drive, Beltless Spindle Drive |
Spindle Speed | 12,000 RPM (15,000 RPM optional) |
Synchronous Tapping Speed Limit | 6,000 RPM |
Tapping Performance in Production | M 20 x 2.5 in aluminum, M 14 x 2.0 in steel |
Drilling Performance in Production | 38 mm in aluminum, 25 mm in steel |
Spindle Torque | 26 ft-lb @ 1,500 RPM, 25% Duty-Cycle |
Tool Type | BT #30, 4-bearing spindle – 2-top, 2-bottom |
Spindle Bearing – Inner Diameter | 40 mm, P4 class-7, Steel Ball Bearings |
Spindle Material / Hardness | SCM415 / HRC 58 – 62 |
Spindle Runout | ≤ 0.000040” T.I.R. |
Retention System / Holding Capacity | MAS-P30T-1 Bellville Spring Stack / 1,650 – 1,760 lbs |
Axis Feeds
Rapid Traverse – X / Y / Z | 2,362 IPM 60 / 60 / 60 / min |
Rated Cutting Feedrate – X / Y / Z | 0.04 – 1181 IPM 30 / 30 / 30 m / min |
Mechanical Way System – X / Y / Z | Roller-Bearing Ways, Roller-Ways – 30 / 30 / 35 mm width |
Axis Drive Motor Power – X, Y / Z | 2.0 HP / 3.0 HP 1.5 kw / 2.2 kw with brake |
Axis Thrust Force – X, Y / Z | 3,335 lbs / 3,692 lbs 14,840 N / 16,430 N |
Ballscrews – X, Y, Z | 32 mm Ballscrews, 16 mm Pitch |
Positioning Accuracy – X / Y / Z | ±0.00015” ±0.004 mm |
Positioning Repeatability – X / Y / Z | ±0.00008” ±0.002 mm |
Least Input Command Increment | 0.0001” / 0.000040” 0.001 mm / (40-millionths in metric) |
Tool Changer
Tool Capacity | 21-Tools, Drum Turret |
Tool Shank | BT#30, MAS P30T-1 Pull-Stud |
Tool Change Time | 1.6 sec tool-to-tool, Servo motor driven |
Maximum Tool Diameter / with adjacent tool | 2.36” / 3.15” 60 mm / 80 mm with no adjacent tool |
Maximum Tool Length / Weight | 7.87” / 6.6 lbs 200 mm / 3 kg |
Tool Selection / Tool Access | Random access / Bi-directional shortest path |
Specifications
Air Service Requirements | 85 PSI @ 5-scfm 6 kg/cm2 |
Connected Load Electrical Requirements | 16 KVA 220 vac ±5%, 60 Hz |
Coolant Tank Capacity | 32 gallons / 120 liters |
Coolant Pump (Cutting Tools) – HP / Pressure | 1.0 HP / 45 PSI, .75 kw Grundfos MTH4-30/3A |
Coolant Pump (Chip Flush Pump) | 1.0 HP .75 kw |
Floor space requirements (W x D x H) | 50” x 87” x 95” 125 x 221 x 241 cm (+ chip conveyor) |
Machine Weight | 6,110 lbs, 2,770 kg |
Warranty – 1-year machine warranty | 3-year Mitsubishi control, motors, & drive warranty |
U.S.A. Headquarters
Our headquarters is located in Chatsworth, California.
Showroom
Our warehouse features a large 4,000 sq. ft. showroom
Full Customer Support
Fully stocked parts room and training/simulation rooms
Competitive Financing
We offer competitive financing through our partnering company
Stay
Updated
Sign up for our monthly newsletter to stay updated with Expand Machinery news and information.
Machine Info
Take a moment to fill this out and one of our team members will send you information about this machine.
Expandmachinery.com | 818.349.9166 | Copyright © 2015-2024 Expand Machinery, LLC. All Rights Reserved.